Series 310C Enhanced Range Pulse Induction Detectors
- Coils can mount within protective steel enclosure
- Detects bar and Tube at 80 mm range regardless of size
- Controller with Coaxial connection can mount 30 mtrs from coil
- Detectors available in PTFE for High temperature use
These Series 310C Metal Detectors operate by generating a pulsed flux and monitoring its rate of collapse when the bar passes.
This method of detection provides 3 times the range of Inductive Sensors. In addition the Detector coils may mount closely surrounded by metalwork or secured within protective steel enclosure. Furthermore, as the coil windings are PTFE insulated can be used where the product relatively hot.
The detector coils are provided in ABS plastic cases or PTFE coil plates with glanded cable connection. Changes in ambient do not influence operating range.
These Detectors are the ideal solution where Individual bars, sections or tubes must be detected at substantial range where Inductive sensors are inadequate. Sensitivity levels are a factor of product size and profile. Quotations are put forward which specify expected sensitivity and range.